29 on-chip analog-to-digital converter, 1 adc absolute maximum ratings – Texas Instruments Digital Signal Processor SM320F2812-HT User Manual
Page 131
SGUS062B
–
JUNE 2009
–
REVISED JUNE 2011
6.29 On-Chip Analog-to-Digital Converter
6.29.1 ADC Absolute Maximum Ratings
VALUE
(1)
UNIT
V
SSA1
/V
SSA2
to V
DDA1
/V
DDA2
/AV
DDREFBG
–
0.3 to 4.6
V
Supply voltage range
V
SS1
to V
DD1
–
0.3 to 2.5
V
Analog Input (ADCIN) Clamp Current, total (max)
(2)
±
20
mA
(1)
Unless otherwise noted, the absolute maximum ratings are specified over operating conditions. Stresses beyond those listed under
Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only. Exposure to
absolute-maximum-rated conditions for extended periods may affect device reliability.
(2)
The analog inputs have an internal clamping circuit that clamps the voltage to a diode drop above V
DDA
or below V
SS
. The continuous
clamp current per pin is
±
2 mA.
Copyright
©
2009
–
2011, Texas Instruments Incorporated
Electrical Specifications
131
Product Folder Link(s):