TurboChef Technologies Rapid Cook Oven Tornado - Manual (Page 17)

lOAdING A MeNu fROM A sMART CARd
At some point you may be required to overwrite the
existing menu settings with new ones via a smart
card. Please note that once the procedure below is
completed,
the old menu settings will be perma-
nently lost .
1. ensure the oven is in the oven off/cooling
down mode.
2. enable the load menu function:
a. Simultaneously press the up and down keys.
b. enter the code 6-3-6-8 (M-e-n-U) and press
enter.
c. Press 9 to enable load menu.
3. remove the lower access panel (Figure 9).
4. insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select load menu from card. The menu on
the smart card will load to the oven.
7. when this process completes, the oven will
beep. remove the smart card and reattach the
lower access panel.
sAvING A MeNu TO A sMART CARd
At some point you may be required to save your
existing menu settings to a smart card (for example,
if the control board needs to be replaced). Please
note that once the procedure below is completed,
any existing menu settings on the smart card will be
permanently lost
.
1. ensure the oven is in the oven off/cooling
down mode.
2. enable the save menu function:
a. Simultaneously press the up and down keys.
b. enter the code 6-3-6-8 (M-e-n-U) and press
enter.
c. Press 9 to enable load menu. The oven will
return
to oven off/cooling down.
d. Simultaneously press the up and down keys.
e. enter the code 7-2-8-3 (S-A-v-e) and press
enter. The oven will return to the oven off/
cooling down screen.
3. remove the lower access panel (Figure 9).
4. insert smart card into oven (Figure 9).
5. Press the bottom-left soft key.
6. Select save menu to card. The menu on the
oven will load to the smart card.
7. when this process completes, the oven will
beep. remove the smart card and reattach the
lower access panel.
9 AsseMBly ANd INsTAllATION
figure 9: insert Smart Card