TurboChef Technologies Rapid Cook Oven Tornado User Manual

Page 34

Advertising
background image

26

step 10: Apply Oven Guard and Clean Oven
exterior

o

Spray oven guard on towel. wipe sides of cook

cavity and inside of door.

o

x

do not spray oven guard directly into cook
cavity or wipe on nozzle plates/bottom element.

o

wipe the oven exterior with a clean, damp towel.

o

oven is ready to turn on.

TIPs fOR PROlONGING OveN lIfe

dO:

o

ensure the oven is cleaned daily.

o

Use only TurboChef oven Cleaner.

o

remove items from the oven as soon as they

are cooked.

o

Use only microwave-safe TurboChef-approved

cooking accessories in the oven.

o

review cooking instructions to ensure oven

settings are correct for corresponding products.

o

Call Customer Service (800.90TUrBo or

+1 214-379-6000) or your Authorized

Distributor immediately if wave guide covers
are broken.

o

Keep this manual for future reference.

dO NOT:

o

x

Lift the oven by its handle.

o

x

Slam or mishandle the oven door.

o

x

Place foil or metal objects of any kind in the oven.

o

x

operate the oven without food in the cook

cavity.

o

x

Frequently open and close the door to check
the product.

o

x

Cook items wrapped in plastic or any type of
cling film.

o

x

Put products in the oven until ready to cook.

o

x

Use cleaning agents that are not approved for
the oven.

o

x

Allow any cleaning solution or water to remain
on the cook cavity floor after cleaning or at any
other time.

o

x

Place excessive weight on top of the oven.

TROuBlesHOOTING

in order to save time and money, please perform
the following steps prior to calling for warranty
service. reference Table 1 on page 27.

1. Press the back key until the oven screen reads

“Cooling Down” or “oven off.”

2. record the serial number (near the top of the
screen).

3. Simultaneously press the “4” and “6” keys to

view the oven faults.

4. record the cook count (second line on the
screen) and any faults (F1 to F6) that have
occurred.

5. Press the enter key, and then the “Self-Test”

soft key to initiate an oven self test.

6. once all subsystems are tested, record which

ones - if any - display a “Fail” message.

7. Press the back key until the oven screen reads
“Cooling Down” or “oven off.”

8. Press the bottom-right soft key to turn on the

oven. Allow the oven to warm up to its set

temperature.

Upon completing the above steps, please have the
information recorded ready when calling Customer
Service at

800.90TUrBo/+1 214-379-6000 or

when calling your Authorized Distributor

.

MAINTeNANCe ANd TROuBlesHOOTING

Advertising
This manual is related to the following products: