Toshiba IK-52N - Manual (Page 15)

14
5. Input Output Signal Specifications
HD/VD Output Amplitude Specifications
The amplitude level is the representative value
when terminated with 10k
Ω
. Output is enabled
when the rear panel HD/VD signal input/output
switch is set to the INT side.
4.5V HD
VD
0V
4.5V
0V
VIDEO INDEX Output Specifications
The amplitude level is the representative value
when terminated with 10k
Ω
.
4.5V
0V
262.5H
VD Input Specifications
* Input impedance: 75
Ω
or 1k
Ω
or greater
* Input amplitude 2.0 to 5.0 Vp-p (75
Ω
termina-
tion ON or OFF)
* Voltage and pulse width were measured at
pin 7 of the 12-pin connector located on the
rear panel.
5H to 21H
2.0 to 5.0Vp-p
HD Input Specifications
* Input impedance: 75
Ω
or 10k
Ω
or greater
* Input amplitude 2.0 to 5.0 Vp-p (75
Ω
termina-
tion ON or OFF)
* Voltage and pulse width were measured at pin
6 of the 12-pin connector located on the rear
panel.
4.0
µ
s to 10.0
µ
s
2.0 5.0Vp-p
Trigger Pulse Specifications
* Input impedance: 10k
Ω
or greater
* Voltage and pulse width were measured at
pin 11 of the 12-pin connector located on the
rear panel.
More than 2
µ
s
More than 2
µ
s