Thecus Technology M3800 - Manual (Page 43)

System Logs
Item Description
Truncate All Log File
Clear all log files.
|<< < > >>| Use the forward ( > >>| ) and backward ( |<< < ) buttons
to browse the log pages.
INFO Provides all log information including warning messages and
error messages.
WARN Shows all warning messages and error messages.
ERROR Shows only error messages.
GO Specify the number of lines per page and press Go.
Ascending Shows logs by date in ascending order.
Descending Shows logs by date in descending order.
Download All Log File Export all logs to an external file.
Time and Date Settings
From the System menu, choose the Time
item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You
can also elect to synchronize the system
time on the M3800 with an NTP (Network
Time Protocol) Server. You can change
any of these items and press Apply to
confirm your settings.
See the following table for a detailed
description of each item:
Time
Item Description
Date
Sets the system date.
Time Sets the system time.
Time Zone Sets the system time zone.
NTP Server Select Yes to allow the M3800 to synchronize with the NTP
server shown below.
Select Manually to allow the M3800 to synchronize with an NTP
server of your choice.
Select No to not have the M3800 to synchronize with an NTP
server.
If an NTP server is selected, please make sure your M3800’s network has been
setup to access the NTP server.
WARNING
43