Tekxon Technology MegaCam - Manual (Page 12)

12
• WB (White Balance) - Allows the
camera to adjust to light conditions
using preset selections (auto, sun,
shade, tungsten, fluorescent).
• TV Mode - Choose the TV standard
that you use in your country for the
video you record.
• Language - Let you to choose different
languages for Camera menu.
• Step 5 Press OK to select a menu
option. The selected option will be
highlighted.
• Step 6 Press to cycle through
the available settings.
• Step 7 Press OK to choose a setting.
The USB Port is located in the Digital
Interface Compartment on the left side of
the camera.
• Step 1 Connect
the smaller end
of the USB cable
into the USB port
of your digital
camera.
• Step 2 Connect the
other end of the USB
cable to the USB port
located on the back of
your computer.
Hooking Up to Your TV/
VCR
Connect your camera to a television set if
you want to have a larger view of your
photos.
To view your images on television
set:
• Step 1 Press the Power button to
turn your camera on. Wait for the
indicator light to signal that the camera is
ready.
• Step 2 Press to bring up the
camera’s menu screen.
• Step 3 Press OK on the Setup option.
• Step 4 Press to move down the
menu until the TV Mode option is
highlighted and select the TV standard
that use in your country (NTSC/PAL).
• Step 8 Press to move down the
menu screen and choose Exit. Then,
press OK to exit the menu screen.
Hooking Up to Your
Computer
You need to connect the camera to your
computer’s USB port to transfer photos into
your computer. This section shows how
you can connect the camera to your
computer.
You must install the Dual Camera Driver
from the Digital Camera CD before
connecting in order for your computer to
function properly using the USB. See the
section, “Installing Software” on page 14
for details on how to install the driver.