Tekxon Technology MegaCam - Manual (Page 8)

8
• Step 6 After the memory card has been
formatted, all the pictures in the memory
card will be deleted. And there is a
message appeared: No pictures in
memory.
Press to switch to Record mode. You
can now begin taking pictures.
Shooting Photos
Taking pictures with your digital camera is
a snap. Just point and shoot!
• Step 1 Make sure that the camera is
turned on.
• Step 2 Use the LCD display or the
Viewfinder to frame the subject you want
to photograph.
• Step 3 Press the Shutter Release
button to take the picture.
The picture will remain on the display and
LCD will display “Processing” until it is
stored in the memory. Now LCD Display
will resume, you may focus your next
target to take the next picture.
Tip: Unlike a traditional camera, if you
move the camera your image will not be
blurred at this time.
Formatting the SD Card
It is best to format your SD memory card
before using it to store pictures.
• Step 1 First switch to Play mode and
press OK Button to bring up the Erase
menu.
• Step 2 Press to move down to the
Format SD Card option.
• Step 3 Press OK.
• Step 4 The message “Format the
storage?” then appears.
To format the memory card, press to
select Yes on the screen and then press
the OK button. You will hear a ring
sound when you press it.
If you do not want to continue with
formatting the memory card, select
Cancel on the screen and then press
the OK button.
• Step 5 The camera then begins
formatting the memory card. Wait for the
formatting process to finish.