Serial connection – TravRoute CoPilot 2002 User Manual
Page 14
Advertising
- 10 -
Serial Connection
When connecting to a laptop through a serial port the receiver is powered through the
laptops battery. Plug the PS/2 port connector on your GPS unit into the PS/2 port of your
laptop. Do not plug the serial port connector into your laptop until after Windows has
finished booting up. TIP: To see the serial ports available on your PC, open the Control
Panel, select System, click on the Device Manager tab, then click on the plus sign next to
Ports in the list of devices. The Settings box displays the hardware settings used by the
COM port. The setting for your COM port should be 4800,8,N,1. See diagram below for
connection instructions.
Advertising