Topcom BUTLER 132 - Manual (Page 24)

24
• When you pick up the handset from the base unit you are immediately
connected to the caller. You do not need to press the Line button.
This function has to be programmed before it can be used
(see 4.16 Automatic answering).
4.3 Last number redial
• P ress the Redial button. The last number dialled appears on the display.
• Press the Line button. The number will be dialled automatically.
• Press the Line button when you want to terminate the call.
4.4 Programming memory numbers
You can program 10 telephone numbers (of max. 24 digits) in the phone’s
m e m o ry.
• Press the Set button.
• Press the Memory button.
• Press the number of the memory location (0-9).
• Enter the telephone number you wish to save on this memory
location.
• Press the Memory button. You will hear a confirmation tone.
Remarks :
•
All memory numbers will be erased when the default settings have been re s e t .
• If you wish to insert a pause, press the Redial button on the location where
you want a pause.
4.5 Calling a memory number
• Press the Line button.
• Press the Memory button.
• Press the number of the memory location (0-9) where you have
programmed the desired telephone number.
• The memory number will be dialled automatically.
• Press the Line button when you want to terminate the call.
4.6 Babycall
This function allows you to program one specific number (memory location
0) that will be dialled automatically no matter what key has been pre s s e d ,
except for the Set button. To activate this function, do the following :
• Press the Set button.
• Press numerical button ‘6’.
• Press numerical button ‘1’ to activate/deactivate this function.
• Press the Memory button. You hear a confirmation tone.
Default setting : not activated
Butler 132/137