SINBO SHB-3051 - Manual (Page 12)

- 11 - SHB 3051 INSTRUCTION MANUAL
SAFETY INSTRUCTION
Do not operate this machinery with a damaged cord or plug or after the
machinery malfunctions, or is dropped or damaged in any manner. Return
machinery to the nearest authorized service facility for examination ,repair
or electrical or mechanical adjustment.
13. ALWAYS DISCONNECT FROM POWER SOURCE BEFORE SERVICING
MACHINERY. Make sure switch is in OFF position before reconnecting.
14. MAINTAIN MACHINERY WITH CARE. Keep blades sharp and clean for
best and safest performance. Follow instructions for lubricating and changing
accessories.
15. REMOVE ADJUSTING KEYS AND WRENCHES. Make a habit of checking
for keys and adjusting wrenches before turning ON machinery.
16. CHECK FOR DAMAGED PARTS BEFORE USING MACHINERY. Check for
binding and alignment of parts, broken parts, part mounting, loose bolts, and
any other conditions that may affect machine operation. Repair or replace
damaged parts.
17. USE RECOMMENDED ACCESSORIES. Refer to the instruction manual for
recommended accessories. The use of improper accessories may cause risk
of injury.
18. DO NOT FORCE MACHINERY. Work at the speed for which the machine or
accessory was designed.
19. Do not put your fingers or utensils such as spoons into feeder opening
during operation, if food becomes lodged in feeder opening ,use food pusher
or another piece of fruit or vegetable to push it down.
20. Cutting blades are sharp. handle carefully, do not use machinery for any
purpose other than its intended use.
21. This machinery is not intended for use by persons(including children)with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the machinery by a person responsible for their safety.
2. Security Measures
* Home use only. Do not use for industrial purpose.
* Unplug when assembling and disassembling the unit.
* Close supervision is necessary when any appliance is used near children.