SINBO SHB-3051 - Manual (Page 14)

- 13 - SHB 3051 INSTRUCTION MANUAL
GRINDING
Cut all foods into pieces so that they fit easily into the hopper opening.
Plug the unit on, then switch ON/OFF knob to "ON" position.
Feed foods into the hopper plate. Use for it only the food pusher (fig.7).
After use switch the unit off and unplug it from the power supply.
3. Cleaning and maintenance
DISASSEMBLING
Make sure that the motor has stopped completely.
Disconnect the plug from the power outlet.
Disassemble by reversing the steps from 1 -6 pictures.
To remove the cutting plate easily, place a screwdriver
between the cutting plate and the head as illustrated and
lift it up (fig.8).
When you met difficulties in detaching meat mincer
components, please shake this part to remove
easily(fig.9)
CLEANING
Remove meat, etc. Wash each part in warm soapy water.
A bleaching solution containing chlorine will discolor
aluminum surfaces.
Do not immerse the motor housing in water, but only wipe it
with a damp cloth.
Thinners and petrol will crack or change the color of the unit.
Wipe all the cutting parts by vegetable oil-wet cloth.