Trust Computer Products Super G 802.11g - Manual (Page 14)

108Mbps SuperG Wireless PCI Adapter
14
Installing The Driver Installing the software involves two steps. The first is to install the Driver and the
second is to install the Configuration Utility.
• When
the 108Mbps SuperG Wireless PCI Adapter has been inserted into a 32-bit
PCI slot, the Found New Hardware screen appears.
• Continue with the installation and the screen below should appear. Click on Yes to
proceed with the installation.
• Insert the Driver CD into the CD-ROM drive. If you have not inserted the Driver CD into
the CD-Rom a prompt such as the one below will appear. Click OK.