Toro TMC-424E - Manual (Page 9)

To Set Interval Days:
1. Set the Program Switch to select
program A, B, C, or D.
2. Turn the Function Dial to the Interval
Days position.
3. The CYCLE LENGTH prompt and the
current Interval (01–31DAY or -- -- -- [Off])
will be displayed.
4. Press the or button to select the
Interval cycle length.
NOTE: The cycle length can be set from
01 (water every day) to 31 (water once
every 31 days). The Interval cycle starts
at 01 and increases by 1 digit each day.
The watering day occurs when the
selected Interval cycle length is reached.
To specify when the first watering day
will occur, the current day within the
Interval cycle must be selected.
For example, if a 04 DAY Interval is
entered and watering is to begin in one
day, select 03 as the Current Day.
5. To select the Current Day in the Interval
cycle, press the button to display the
CURRENT DAY prompt.
6. Press the or button to select the
value (01–selected Interval number).
7. To exclude specific days from watering
(7 maximum), press the button to
select the day.
8. To exclude the day from the schedule,
press the or button to display the
Watering Off icon.
9. Repeat steps 7 and 8 to continue
excluding days.
9