TP-Link TD-W8900GB - Manual (Page 23)

TD-W8900GB 54M Wireless ADSL2+ Router User Guide
16
Figure 4-13
If the result displayed is similar to that shown in figure below, it means that your PC has not
connected to the Router.
Figure 4-14
Please check it following these steps:
1. If the connection between your PC and the Router is correct?
)
Note:
The 1/2/3/4 LEDs of LAN port which you link to on the Router and LEDs on your PC's adapter
should be lit.
2. If the TCP/IP configuration for your PC is correct?
)
Note:
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254, the gateway must be 192.168.1.1.
For more details of configuring the Router, please refer to
1
Chapter 5
Chapter 5. Basic Router Configuration
This User Guide recommends using the “Quick Installation Guide” for first-time installation of the
TD-W8910G 54M Wireless ADSL2+ Router. For advanced users, if you want to know more about
the TD-W8910G and make use of its functions adequately, you need to read this chapter and
configure the Router’s advanced settings though the Web-based Utility.
This chapter will describe each web page on the Utility and each page’s key functions. The Utility
can be accessed via your web browser though the use of a computer connected to the Router.
You may configure the TD-W8910G 54M Wireless ADSL2+ Router’s settings though the
Web–based Utility.