TP-Link TD-W8900GB User Manual
Page 46
Advertising
TD-W8900GB
54M Wireless ADSL2+ Router User Guide
39
Figure 5-25
Setup an Incoming IP Filtering rule:
1. Click
the
Add button (pop-up Figure 5-25), and then you will set the new rule in the next
screen (shown in Figure 5-26).
Figure 5-26
2. Enter
the
Filter name for the rule, it is exclusive and must be filled in.
3. Select
Protocol in the drop-down list, enter Source IP address, Source Subnet Mask,
Source Port, Destination IP address, Destination Subnet Mask, and Destination Port for
the rule.
4. Select at least one WAN interfaces displayed below to apply this rule.
5. Click
the
Save/Apply button to save this entry.
Advertising