How to use the cd – TAG MIL-BOOK 10 User Manual
Page 81
How to Use the CD
NOTE:
• The drivers may have been updated after this manual was published. For drivers
upgrade, please contact your dealer.
• You can always find README or document files on the CD. These files
contain the latest information from the software supplier. Please read the files
together with this chapter.
NOTE:
• This CD supports Windows 98, Windows 2000, and Windows NT 4.0. Other
systems are not supported.
• The available items may differ according to your computer model and operation
system.
• If you want to play MIDI file under WinNT, please install Software Table under
“d:\NT40\Audio\Cwave01_14.”
You can set up the following drivers from the CD:
Mitsumi USB Floppy driver
NOTE: If you are using Windows 2000, you will not need to install this driver. Windows
NT does not support USB device.
ATI VGA driver
Crystal Audio driver
Askey MDC (modem) driver
Realtek LAN driver
Alps Touchscreen driver
FIR driver
NOTE: If you are using Windows 2000, you will not need to install this driver. Windows
NT 4.0 does not support FIR.
Card Wizard driver
NOTE: If you are using Windows 98 or Windows 2000, you will not need to install this
driver.
6-2
Installing Software Drivers