TAG MIL-BOOK 10 - Manual (Page 93)

Make sure that the CD is not dirty. Clean the CD with a CD cleaning
kit, available in most computer stores.
Make sure that the CD/DVD drive driver is installed correctly.
Make sure that the computer supports the CD or the file format
contained.
You cannot eject a CD.
The CD is not properly seated in the drive. Manually release the CD
following the method described next:
Turn off the system.
Insert a small rod, such as a straightened paper clip, into the
drive’s manual eject hole and push firmly to release the tray.
Pull the tray out until fully extended, and then remove the CD.
Display Problems
Nothing appears on the screen.
If the power-on indicator is not on, check the electrical outlet, the
plugs and power cords.
If the power button does not respond to a light touch, press the
button firmly.
If you are using the battery power, make sure that it has a charge
remaining and that it is installed correctly.
During operation, the screen may automatically turn off as a result of
power management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase brightness by
pressing on the brightness/volume control button on the front panel
of the Tablet PC.
The display output might be set to an external monitor.
Reset the Tablet PC by pressing the reset button on the right side of
the computer or by pressing
Ctrl + Alt + Del keys if you are using an
external keyboard.
Troubleshooting 8-5