TANDBERG 3.0 - Manual (Page 39)

Copyright © TANDBERG 2008 Reference Guide Version 3.0 rev 3.0 35
5.3 recording.delete
This method deletes a recording from the IP VCR.
Parameter Type Comments
recordingId Integer The recording ID for the recording to delete.
This should be the identifier as returned by
recording.enumerate.
A "no such recording" fault is returned if the recording does not exist.
5.4 recording.enumerate
This function enumerates the recordings stored on the IP VCR.
Parameter Type Comments
enumerateID (optional) String An enumerateID, as specified in section 2.
enumerateFilter (optional) String A filter expression.
Valid expressions within the enumerate filter are:
Expression Type Comments
recordingId Integer The unique index of this recording
internal Boolean True if the recording is stored internally
external Boolean True if the recording is stored externally
inProgress Boolean True if the recording is in the process of being
made
This returns the following:
Response Type Comments
enumerateID (optional) String An enumerateID, as specified in section 2.
recordings array of structures See below for layout of the structures.
The "recordings" array contains the following structures:
Field Type Comments
recordingName String The name of this recording.
recordingId Integer A unique identifier for this recording.
folderId Integer The unique identifier of the folder in which this
recording is stored.
numericId String The numeric Id registered with the SIP registrar
or h323 gatekeeper.
pin String The PIN of this recording.
status String The current status of the recording. This can be
any of the following:
idle
,
initialising
,
invalid
,
uploading
,
deleting
or
recording
.
playbackEnabled Boolean True if the recording can be played back by
users.
registerWithSIPRegistrar Boolean True if the numeric ID is registered with the SIP
registrar.
registerWithGatekeeper Boolean True if the numeric ID is registered with the
h323 gatekeeper.