Milan mi0, Left right, Stereo pa with an external mixer – Turbosound Milan Mi0 User Manual
Page 16: User manual, Milan mi0 user manual page 16
user manual
MILAN Mi0
MILAN Mi0 user manual
Page 16
Stereo PA with an external mixer
Two Milan loudspeakers form the left and right elements of a stereo PA setup with all signal
sources connected to an external mixing console. Connect the outputs of the mixer to the Mi0 line
inputs using either balanced XLR cables, or balanced or unbalanced jack cables. Bring up the
master faders on the mixer, ensuring that the outputs are not clipping, and then adjust both
loudspeakers’ level controls to the desired loudness. For consistent balance and response set the
tone controls to approximately the same positions on both cabinets.
MIC GAIN
POWER
ON
BASS
TREBLE
MIC IN
MIX OUT
GROUND LIFT
LINE IN
LINE LEVEL
ON
MAX
MIN
+
-
+
-
MAX
MIN
LIMIT
MIC GAIN
POWER
ON
BASS
TREBLE
MIC IN
MIX OUT
GROUND LIFT
LINE IN
LINE LEVEL
ON
MAX
MIN
+
-
+
-
MAX
MIN
LIMIT
LEFT
RIGHT