Turbosound Milan Mi0 - Manual (Page 17)

user manual
MILAN Mi0
MILAN Mi0 user manual
Page 17
Stereo PA with an external mixer and subwoofers
In this example, sub frequencies are routed to separate subwoofers in order to gain extended
frequency response and higher overall sound level. Connect the mixer output first to the
subwoofers and then loop up to the Milan loudspeakers. Connect the outputs of the subwoofers to
the Mi0 line inputs using either balanced XLR cables, or balanced or unbalanced jack cables. The
tone controls on both cabinets should be set to the same positions, nominally flat to begin with.
Ensure that the mixer outputs are not clipping, and then adjust both loudspeakers’ level controls
to the desired loudness.
MIC GAIN
POWER
ON
BASS TREBLE
MIC IN MIX OUT GROUND LIFT LINE IN
LINE LEVEL ON
MAX MIN + - + - MAX MIN
LIMIT MIC GAIN
POWER
ON
BASS TREBLE
MIC IN MIX OUT GROUND LIFT LINE IN
LINE LEVEL ON
MAX MIN + - + - MAX MIN
LIMIT