Tektronix VX4357 - Manual (Page 26)

To avoid electric shock, tighten the module mounting screws after
installing the module into the mainframe to ensure that the front panel is
properly grounded.
There are two labeled ejector handles on the card. To install the card
correctly, make sure the ejector labeled “VX4357” is at the top.
To maintain proper mainframe cooling, unused mainframe slots must be
covered with the blank front panels supplied with the mainframe.
Verify that the mainframe is able to provide adequate cooling and power
with this module installed. Refer to the mainframe Operating Manual for
instructions.
!
Note.
Note.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com