Tannoy WALKMAN W715 - Manual (Page 38)

to record. The voice command is
played back to you.
5 If the recording sounds OK, select Yes .
If not, select No and repeat steps 3 and
4.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
To voice dial
1 From standby press and hold down a
volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile.” The
phone plays the name back to you and
connects the call.
Diverting calls
You can divert calls, for example, to an
answering service.
When Restrict calls is used, some divert
call options are not available. See
Restricted dialling on page 40.
To divert calls
1 From standby select Menu > Settings >
the Calls tab > Divert calls .
2 Select a call type and a divert option.
3 Select Activate .
4 Enter the number to divert calls to and
select OK .
More than one call
You can handle more than one call at a
time. For example, you can put an
ongoing call on hold, while you make or
answer a second call. You can also
switch between the two calls. You
cannot answer a third call without
ending one of the first two calls.
Call waiting
You will hear a beep if you receive a
second call while call waiting is active.
To activate call waiting
• From standby select Menu > Settings >
the Calls tab > Manage calls > Call
waiting > Activate .
To make a second call
1 During the call, press . This puts
the ongoing call on hold.
2 Select Options > Add call .
3 Enter the number to call and press
.
To answer a second call
• During the call, press . This puts
the ongoing call on hold.
To reject a second call
• During the call, press and
continue with the ongoing call.
38 Calling