Tannoy WALKMAN W715 - Manual (Page 70)

To select an MMS profile
1 From standby select Menu > Settings >
the Connectivity tab > Message
settings > MMS .
2 Select an existing profile or create a
new one.
To set the message server address
1 From standby select Menu > Settings >
the Connectivity tab > Message
settings > MMS .
2 Scroll to a profile and select Options >
Edit .
3 Scroll to Message server and select
Edit .
4 Enter the address and select OK >
Save .
The phone does not ring or rings too
softly
Make sure that
Silent mode has not
been set to On . See To turn off the
ringtone on page 65.
Check the ringtone volume. See To set
the ringtone volume on page 65.
Check the profile. See To select a
profile on page 64.
Check the divert call options. See To
divert calls on page 38.
The phone cannot be detected by
other devices using Bluetooth
wireless technology
You have not turned the Bluetooth
function on. Make sure that the visibility
is set to show phone. See To turn on
the Bluetooth function on page 29.
I cannot synchronise or transfer
content between my phone and my
computer, when using the USB cable.
The cable or software that came with
your phone has not been properly
installed. Go to
www.sonyericsson.com/support to
read Feature guides which contain
detailed installation instructions and
troubleshooting guides.
I have forgotten my code memo
passcode
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are
deleted. The next time you enter the
code memo, you must proceed as if
you are opening it for the first time.
To reset code memo
1 From standby select Menu > Organiser
& Tools > Code memo .
2 Enter an incorrect passcode 3 times.
70 Troubleshooting