Teac SR-L70i - Manual (Page 12)

12
Setting the Clock
1 Press and hold the CLOCK ADJ button
for more than 3 seconds, and release it
when “12 HR” or “24 HR” blinks on the
display.
If you want to change the hour mode, turn
the TUNING/SET knob.
< If you do not turn the knob or press the
button for 8 seconds, timer setting mode
will end.
2 Press the CLOCK ADJ button again.
The “hour” value blinks.
3 Turn the TUNING/SET knob to set the
current hour, and then press the CLOCK
ADJ button.
Setting daylight saving time
To change the clock for daylight saving time,
set the DST switch to ON. The DST indicator
(
) appears on the display.
4 Turn the TUNING/SET knob to set the
current minute, and then press the
CLOCK ADJ button.
Setting the clock is now completed and the
clock starts from the 00 second.