Teac SR-L70i - Manual (Page 14)

14
Basic Operation (2)
Dimmer
You can change the brightness of the front
panel display. Use the SNOOZE/DIMMER
button to set the brightness to one of three
levels.
If this button is pressed in standby mode,
the display is brightened for about 5
seconds.
< T h is f u n c t i o n is c a n ce l e d w h e n t h e
STANDBY/ON switch is pressed.
Muting
To mute the sound temporarily, press the
MUTING button. Press the MUTING button
again to restore the sound.
< If you change the volume or source when
muted, muting is canceled.
1 Insert the iPod into the dock connector.
< After inserting the iPod, slide the dock
adjuster to fit the iPod being used.
The iPod indicator ( ) appears on the
display.
2 Press the Play/Pause button (y/J) on
the iPod or the iPod button (y/J) on
the SR-L70i. The SR-L70i will turn on
and start playing music on the iPod.
< Whenever an iPod is docked and the SR-L70i
is connected to an AC power supply, the
battery of the iPod is recharged until it is full.
However, to avoid noise, the iPod will not be
charged when using the tuner in AM mode.
< When headphones are plugged into the
iPod, sound is output from both the SR-L70i
speakers and the headphones.
Compatible iPod Software
If your iPod will not work with the SR-L70i or
with the remote control, a software update
might solve the problem.
Visit the Apple website and download the latest
iPod Software.
http://www.apple.com/ipod/download/
Listening to an iPod (1)
Adjuster