TEN Technology naviPlay Bluetooth Stereo Headset Kit for iPod - Manual (Page 16)

The naviPlay Stereo Headset is designed for different uses, including as a wireless headset for
Bluetooth-enabled mobile phones. Since the naviPlay Stereo Headset has a built-in microphone,
you can use it to answer your phone calls.
Other products that are Bluetooth-certified to support stereo audio and remote control will also
work with the naviPlay iPod Adapter or the naviPlay Stereo Headset. You can listen to music
stored on Bluetooth Stereo enabled personal computers, PDAs, or mobile phones with the
naviPlay Stereo Headset. You will be able to play your iPod music through Bluetooth stereo
enabled speakers, home stereo systems, stereo headphones and even car stereo systems using
the naviPlay iPod Adapter. The possibilities are limitless!
Using the naviPlay Headset With Bluetooth-Enabled Mobile Phones
The microphone built into the naviPlay Stereo Headset allows it to be used as a wireless
headset with Bluetooth-enabled mobile phones. Now, while you are enjoying your music from
the iPod, you won't miss a call or have to quickly remove your headphones just to answer the
call. You will hear ringtones through the Headset when your phone is receiving a call. A push of
the Call button will accept the call and switch the Bluetooth connection to your phone.
Depending on your phone, you can choose not to accept the call by pushing the
Power/Play/Pause button to reject the call. When you are done with the call, push the Call button
to hang up and resume listening to music.
Note that if you are on a call for more than 3-5 minutes, the iPod and the naviPlay Adapter will
go into sleep mode to conserve power. You may have to turn on the naviPlay Adapter to resume
listening to music. During phone calls the volume in the right headset speaker is automatically
limited to minimize potential echo effect for callers.
Using naviPlay Headset with Other Bluetooth-Enabled Devices 16
Using naviPlay Headset with Other Bluetooth-Enabled Devices