TEN Technology naviPlay Bluetooth Stereo Headset Kit for iPod - Manual (Page 22)

Updating naviPlay Firmware 22
New versions of firmware may be available to enable features, optimize performance and/or fix
problems. You can update the firmware on the naviPlay adapter and naviPlay Headset when a
new version is available from the TEN Technology Web site: www.tentechnology.com.
Download the available firmware update to your computer and follow the instructions in the “READ
ME” file. The firmware must be transferred “over-the-air” via Bluetooth to the naviPlay device. You
will need a Bluetooth-enabled PC or Macintosh that supports the Object Push Profile (OPP).
Setting up the naviPlay Device for Firmware Update
1. Turn on the naviPlay device that you are updating (Adapter or Headset). For best results, turn
off other nearby Bluetooth devices and fully charge your naviPlay device before attempting
firmware update. Better yet, keep it plugged into the charger.
2. Press and hold the POWER button for eight seconds to put the device in firmware update
mode. The status light shows quick double-blinks in amber as soon as the Adapter is in
firmware update mode. Release the POWER button after you see the amber double-blinks.
Updating naviPlay Firmware from a Bluetooth-Enabled Windows PC
Refer to the documentation that came with your PC or Bluetooth hardware for sending a
business card file (.vcf) to another Bluetooth device.
Updating naviPlay Firmware from a Bluetooth-Enabled Macintosh
The following Macintosh operating systems are required to update firmware over the Internet:
Mac OS X 10.2.8,10.3.1 or later, or 10.4 or later.
Updating naviPlay Firmware