Cd or cd+g operations, English – The Singing Machine ISM-370 User Manual

Page 18

Advertising
background image

E 17

ENGLISH

PREPARATION

• This unit is designed to play CDs/CD+Gs bearing the identification logo “ / ”. If CDs/

CD+Gs do not conform to the CD standard, they may not play properly.

• Fingerprints and dust should be carefully wiped off with a soft cloth. W ipe in a straight motion

from the center of the disc to the outside edge.

• Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or

thinner to clean compact discs. These chemicals will permanently damage the plastic surface

of the disc.

• Always place the compact disc on the disc tray with the label facing upward. Compact discs

can be played on only one side.

• To remove a disc from its storage case, press down on the center of the case and lift the

disc out, holding it carefully by the edges.

• Discs should be returned to their cases after use to protect them from dust and scratches.

• To prevent warping the disc, do not expose it to direct sunlight, high humidity or high

temperatures for extended periods of time.

• Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips

pens may damage the surfaces of the disc.

PLAYING CD OR CD+G DISC

• Press FUNCTION button on the unit or CD/CDG button on the remote to select CD/CDG mode.

• Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.

• Adjust MIC VOLUME/A.V.C./ECHO/KEY controls as needed to achieve the desired mix of

music and vocals through your sound system.

• Do not press the disc cover of the CD compartment while it’s playing.

• Never place anything except a compact disc on the disc tray. Foreign objects can damage the

unit.

• Do not apply excessive force to disc cover.

• Only place one disc on the disc tray at a time.

LOADING A DISC

• Lift up CD door to open CD/CDG compartment door. Place a disc in the compartment

with the printed side facing toward you.

• Gently close the CD door to the CD/CDG compartment. After a few seconds, The unit begins

to read the disc. After that, the disc is playing automatically. (If no disc is loaded, it will display

“ “).

(Refer to the Trouble Shooting Guide on page E22 if a disc is loaded but it does not

work normally.)

CD OR CD+G OPERATIONS

Advertising