TRANWO Technology 3010 - Manual (Page 13)

Plug one end of the provided power adapter into a wall outlet and the other end into the rear of
the receiver.
Turn the ON/OFF switch to the ON position. The LED on the front of the unit should light.
Place the receiver in a convenient location, then adjust its antenna so that the front (curved face)
faces the room where the camera is set up. See "Orienting Units for Optimal Performance", on
page 13.
Connecting to a TV With an Audio/Video Component
Setting Up-Receiver Setting Up-Receiver Setting Up-Receiver Setting Up-Receiver Setting Up-Receiver
2
3
Receiver
VIDEO AUDIO
RF OUT
TV
Audio/Video
Component
VHF/UHF
Power Supply Power Supply Power Supply Power Supply Power Supply
Fine Tuning Fine Tuning Fine Tuning Fine Tuning Fine Tuning
11