TRANWO Technology 3010 - Manual (Page 8)

Setting Up Setting Up Setting Up Setting Up Setting Up
Before you make the connection:
•
Always make sure the unit ON/OFF switch is in the OFF position.
•
Set the channel switches on the back of the camera and receiver to the same channel.
•
If you wish to wall mount the camera, it is recommended that the receiver reception be
tested before fixing in place. Have one person hold the camera against the wall in the
selected mounting area while another checks reception on the TV. If interference or other
problems are present, refer to the Troubleshooting section on page 16 of this manual. You
may need to select a different location in the room for mounting the camera.
Receiver Camera
6