TP-Link TL-SL3226P - Manual (Page 6)

3.1.3 Power On
The TL-SL3226P can be used with the power source in the range of 110 to
260VAC, 50 to 60Hz.
The internal power system of the TL-SL3226P can automatically adjust the
operating power-pressure according to the power-pressure input. The
POWER LED will be light when power on.
Caution:
As a precaution in the event of a power failure, unplug the switch. When the
power resumed, plug the switch back in.
Chapter 3 Installation
3.1 Installation
Follow these steps to install the switch:
The surface must support at least 5kg
The power source must be within 1.5m
Check the power cable to make sure the connection to AC power
Leave enough space for the ventilation
3.1.1 Desktop or Shelf Installation
1. Put the TL-SL3226P on the big and stable desktop, bottom up.
2. Attach the cushioning feet on the bottom at each corner of the device.
3. Upturn the device, put it on the desktop.
3.1.2 Rack Installation
The TL-SL3226P can be mounted in an EIA standard size 19 inch rack.
1. Attach a mounting bracket to each side of the TL-SL3226P with the
screws provided.
2. Sl ide the TL-SF3226P into the Rack.
3. U se the screws to secure the TL-SL3226P to the Rack.
!
!
!
!
TL-SL3226P 24+2G Gigabit Managed Switch User's Guide TL-SL3226P 24+2G Gigabit Managed Switch User's Guide
Figure 3-1 Rack Installation
Power
Slot 1 Slot 2
Link/Act TX RX Act
FDX/Col
1000M
10/100M
Console
17 19 21 23
18 20 22 24
9 11 13 15
10 12 14 16
1 3 5 7
2 4 6 8
100M
24+2G Gigabit Manage d Switch
TL-SL3226P
Link
Act