Topcom Cocoon 350 - Manual (Page 26)

27
7.1. Display
In the stand-by mode, the following items may appear on the display:
- 10/01 MSG = 1 new (not yet heard) message and 10 messages in total
- 15/05 MSG = 5 new (not yet heard) messages and 15 messages in total
7.2 Answering Machine Menu
To activate the answering machine functions:
• Press the Programming Key
.
• ‘ANSWERING’ appears on the display.
• Press the OK key.
After 2 sec., ‘ANS OPER’ will appear on the display. Now you have access to all the answering
machine functions, such as recording message, remote access code, play messages, etc.
The settings are accompanied by an internal voice. The machine will automatically switch to
hands-free mode if the internal voice can be heard without holding the hand set. One can
switch off the hands-free mode by pressing the Speaker key
.
7.3 Keypad Functions
Keys ANS-OPER mode During message play-back
1 None Rewind message
2 Play back messages Pause
3 None Skip message
4 Record memo None
5 Play outgoing message None
6 Select outgoing message Stop
7 Announce VIP code None
8 Number of current rings None
9 Display time None
* Answering machine On None
0 (set key) Change settings None
# Answering machine Off None
0 + 1 Record OGM 1 None
0 + 3 Record OGM 2 None
Cocoon 350
COCOON 350 GB_P_GR 8/8/01 8:52 am Page 27