Load the laundry, Select the programme, Select the required time – Tricity Bendix WDR 1040 W User Manual

Page 10: Start the machine, At the end of the programme

Advertising
background image

10

DRYING 2.25 KG OF COTTON
You have for example just machine-washed and spun at

1000 rpm 4.5 kg (10 lb) of laundry.

They are cotton fabrics of medium weight which you

want to iron as soon as they are dry.

Switch off the machine.

Then remove the laundry from the appliance and divide

the items to obtain two loads of approx. 2.25 kg (5 lb)

each.

1. Load the laundry

Open the door by pulling the catch outward.

Load the items one at a time and close the door.

2. Select the programme

Turn the programme selector dial clockwise to

programme 6.

3. Select the required time

Following indications given in the programme chart on

page 17, turn the time selector dial clockwise to the 60

mins setting (black section).

M0031S

60

80

P1006c

6

4. Start the machine

Depress the ON/OFF button, the mains-on light and

drying light will illuminate and the machine starts

operating.

5. At the end of the programme

The machine stops automatically and the drying light

goes out.

The door is controlled by a safety device which releases

2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF

button again, the mains-on light goes out.
If the laundry is still too damp, select a further brief

drying time, bearing in mind that during the last 10

minutes the appliance carries out a cooling and

anticrease phase.
Remove the laundry.
When the programme has finished you are advised to

unplug the appliance and turn off the water tap.

T0003

132993190.qxd 11/5/02 10:24 AM Pagina 10 (Nero/Process Black pellicola)

Advertising
This manual is related to the following products: