Your new washer-dryer, Ecological hints – Tricity Bendix WDR 1040 W User Manual

Page 4

Advertising
background image

4

Your New Washer-Dryer

Your new washer-dryer meets all modern requirements for effective treatment of laundry with
low water, energy and detergent consumption.
It is gentle with your laundry, simple to use and easy to care for.

The special wool programme with its new delicate
wash system treats your woollens with extreme care.

The anti-unbalance device ensures that the
machine remains stable when spinning.

Automatic cooling of the wash water to 60°C

before draining, with the 95°C programme. This

reduces thermal shock to fabrics, helping to prevent

creasing.

The two drying programmes will give your wash

that soft, relaxed feel whatever the weather.

Ecological hints

To save water and energy and help protect the

environment, we recommend that you follow these

hints:

Adjust the quantity of detergent according to the

hardness of your water supply, the amount of

laundry and the degree of soiling.

A programme without prewash is sufficient for

normally soiled laundry.

Try to load the maximum washing and drying

capacity of the machine as small loads are

uneconomical.

Always load well spun laundry. The higher the spin

speed, the lower the electricity consumption and the

shorter the drying times.

In the interest
of the environment

Materials marked with the symbol

are

recyclable.

Check with your local Council or Environmental

Health Office to see if there are facilities in your area

for re-cycling this appliance.

When the appliance is to be scrapped, cut off the

power supply cable and make the door lock device

unusable to prevent young children from being

trapped inside.

Help to keep your country tidy - use authorised

disposal sites for your old appliance.

How do we help to protect the environment?
We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly

distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the

wash load manually and select a spin programme. For more detailed information see the section headed "Something

Not Working".

132993190.qxd 11/5/02 10:24 AM Pagina 4 (Nero/Process Black pellicola)

Advertising
This manual is related to the following products: