TC electronic SDN BHD x32 - Manual (Page 20)

The Integrator
Now that Digital Konnekt x32 is set up it is time to set up
your DAW application utilizing the Integrator plug-in.
For each external effect, one instance of the Integrator
plug-in must be set up. Each of the Integrator instances
then represents one external effect.
This example illustrates how Integrator is inserted in
Cubase LE with Integrator set up according to the
physical connections as shown in the illustration on page 16.
• This is how you insert the Integrator plug-in.
• The Integrator plug-in now opens.
For each external effects unit you want to integrate you
make the same considerations as you are used to when
setting up software plug-in effects.
-
insert effects are inserted directly on tracks or on a
master bus.
- send effects are set up on a fx track
Reverb 4000 - or other Reverbs
• Insert the Integrator on a stereo track or a stereo bus.
• Select firewire channel 1/2 by selecting “fw ch 1”
As all channels are handled in pairs, selecting “fw ch
1” is therefore the same as selecting firewire
channels 1-2.
FireworX
As described, we want to use the FireworX as an insert
effect on a mono track.
• Select firewire channel 5/6 by selecting “fw ch 5”.
SETUP EXAMPLES
18