Tricity Bendix TBWD 1210 - Manual (Page 7)

7
The Rinse hold option CANNOT be selected for the
automatic Washing & Drying programme.
6 Quick button
This option can be used for lightly soiled Cottons,
Synthetics or Delicate items that have been used or
worn for a short time.
This option is not available with the Wool
programme, the Energy saving programmes (E60° and
E40°) and Mini 30.
7 Half load button
Select this option to reduce water consumptions on the
rinse cycle when washing only a smaller load of cottons
or linens (maximum load size = kg 2.5).
The machine performs the rinses with less water.
8 Extra rinse button
This option can be selected with all programmes, except
the Wool
and Mini 30. The machine will add 2
rinses for cotton and 1 rinse for synthetics and delicates.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
9 Time Dry button
By depressing this button you can select the desired
drying time according to the fabrics (cotton or
synthetics) you have to dry.
To select the drying time you have to push the button
until the drying time you want appears in the display.
For Cottons and Synthetics you can select a time from
10 to 130 minutes.
For automatic Washing & Drying programmes the
drying time is displayed for 3 seconds, then the duration
of the programme will appear.
10 Delay start button
The wash programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
●
Select the programme and the required options.
●
Select the delay start.
●
Depress Start/Pause button: the machine starts its
hourly countdown.
The programme will start after the selected delay has
expired. The Delay start cannot be used with
Drain or
Spin programmes.
Cancelling the delayed start
●
Depress Start/Pause button.
●
Depress Delay start button until « 00’’ » is displayed.
●
Depress Start/Pause button again, if you wish to
restart the machine immediately.
Note!
●
With programme “Soak 30” the selected delay
corresponds to the soak time of the laundry in the
drum.
●
The door will be locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to Pause by pressing the
“Start/Pause” button. After you have closed the
door, press the “Start/Pause” button again.
11 Start/Pause button
This button has two functions: Start - Pause
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
Pause
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
to flash.
To restart the programme from the point at which it was
interrupted, press the Start/Pause button again.
12 Programme time (Display)
The display shows the following information:
Reset/Cancelling - Duration of the programme -
Drying time - Delayed start - Incorrect option
selection - Alarm code - End of programme