Tricity Bendix TBWD 1210 - Manual (Page 9)

9
End of programme
When the programme has finished a flashing zero is
displayed and
the End pilot light illuminates.
At the end of the Soak 30 programme, a flashing zero
is displayed,
the End pilot light is on and the door is
locked to indicate that the water must be drained.
If the R inse hold option has been selected, a flashing
zero is displayed and the End and Rinse hold pilot
lights are on. The door is locked to indicate that the
water must be drained before opening the door.
13 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
light will
illuminate and stay on.
When the programme has finished, the End pilot light
illuminates.
In the event of operating problems the following alarm
code appearson the display.
EE1100 = the machine does not fill
EE2200 = the machine does not empty
EE4400 = the door has not been closed
To eliminate the problem, see paragraph “Something not
working”.
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
End
0
14 Programme selector dial
The selector is divided into 5 sections:
• Cottons
• Synthetics
• Delicates
• Wool
• Special programmes
• Reset programme Off
The selector dial can be turned either clockwise or
anticlockwise.
Position E60° or E40° corresponds to the ENERGY
SAVING programme and position
to “cold wash”.
At the end of the programme the selector dial must
be turned to position “Off” (reset).
Functions
End of programme
When the End pilot light on the programme progress
display illuminates, the door can be opened (
if the Rinse
hold option has not been selected or at the end of the
Soak 30 programme)
.
Turn the programme selector dial to Off.
Switch the machine off by depressing the On/Off
button before removing the laundry.
Altering an option or a running programme
It is possible to change any option before the
programme carries it out.
Before you make any change, you must pause the
washer dryer by pressing the Start/Pause button.
Changing a running programme is possible only by
resetting it. Turn the programme selector dial to "Off"
and then to the new programme position. The washing
water in the tub will not empty out .
Start the new programme by depressing the Start/Pause
button.
Programme
Drain
Off
Dry
Rinses
Spin
Wool
Cottons
Synthetics
Soak 30
40°
60°
40°
30°
30°
95°
60°
E60°
E40°
30°
E60°
40° Dry
Softener
Mini 30
30°
40°
Delicates