Connections, Connecting to an audio system, Connecting to a video system – The Singing Machine STVD-1001 User Manual

Page 19

Advertising
background image

AUDIO

OUT

VIDEO

IN

VIDEO

OUT

AUDIO

IN

L

L

R

R

CONNECTIONS

COMMON WAYS TO CONFIGURE YOUR TV OR VCR

CONNECTING A VIDEO COMPONENT FOR INDEPENDENT DVD VIDEO OUTPUT

CONNECTING AN AUDIO COMPONENT FOR INPUT

You must specify the source you wish to view when you are connecting the video out from the Singing Machine
to either a TV or a VCR. Every TV and VCR manufacturer accomplishes the set-up a little differently. Even
though every TV and VCR is a little different, the general idea is the same - if you have two sources of video
signal (cable or antenna and Singing Machine), you have to specify which one is displayed on the screen.

If you have never used the video input RCA jack or coaxial cable on your TV/VCR you should consult your
TV/VCR user guide. If you don't have your manual please contact your TV/VCR manufacturer for information
either by phone or by viewing their website for online assistance. They will be able to guide you very quickly on
how to configure your TV or VCR to display the video connection.

The three most common ways to set up the TV/VCR are:
1) A ‘Video’ button may be on the TV/VCR or on the remote control. Pressing ‘Video’ may display the input from

your Singing Machine.

2) Try looking for a ‘Video’ channel between the regular channels on your TV/VCR. Do this by setting the channel

on the TV/VCR to channel 2 then pressing the ‘Down’ channel button to see if there is a ‘Video In’ or ‘Line In’
between the lowest channel and the highest channel on your system.

3) The configuration may also be located in the set-up menu on the TV/VCR. Look for a section on ‘Input

Selection’ where you might be able to choose the input source i.e. ‘Cable/Ant.’, ‘Video 1’, ‘Line In’ or ‘Video In’.

(1) Locate the multicolored RCA patch cords.
(2) Connect yellow video cable to your desired DVD Output jack on the back of the Singing Machine.
(3) Connect the other end of the cords to the Video Input jack on your video system.
(4) Press the Video Out Button to DVD/AUX mode.

To connect another audio source (such as a Tuner or an AV Receiver) so you can sing along with its music,
simply connect the AUDIO OUT jacks (Red & White RCA jacks) to the Singing Machine’s AUDIO IN R & L jacks
and choose the DVD/AUX mode by pressing FUNCTION button.

FOR INDEPENDENT DVD VIDEO OUTPUT

CONNECTING TO AN AUDIO SYSTEM

E18

ANOTHER

AUDIO COMPONENT

AUDIO INPUT

R

(Red Jack)

R

L

AUDIO OUT

AUDIO OUTPUT

R

(Red Jack)

REAR VIEW OF

SINGING MACHINE

AUDIO OUTPUT

L

(White Jack)

AUDIO INPUT

L

(White Jack)

ENGLISH

CONNECTING TO A VIDEO SYSTEM

REAR VIEW OF

VIDEO SYSTEM

VIDEO

IN

VIDEO IN

(Yellow Jack)

DVD

VIDEO OUT

(Yellow Jack)

REAR VIEW OF

SINGING MACHINE

DVD OUT

Advertising