The Singing Machine STVD-1001 - Manual (Page 23)

AUDIO SETUP
VIDEO SETUP
SPDIF Setup
SPDIF Output
Sharpness
Brightness
Contrast
SPDIF/RAW
Choose this setting, if your DVD player is connected to a
power amplifer with a coaxial cable or an optical cable.
When playing a disc recorded with DTS and MPEG
audio formats, the corresponding digital signals will be
output from the Coaxial Output jack. This player’s digital
output jacks are designed for a connection to a DTS or
MPEG receiver or decoder.
SPDIF/PCM (Sony-Philips Digital Interface Format/
Pulse code modulation)
Choose this setting, if your DVD player is connected to a
2-channel digital stereo amplifier. When playing a disc
recorded with MPEG audio formats, the audio signal will
be output from the Coaxial Output jack or Optical Output
jack.
Choose this setting to adjust the sharpness of the video
output. High, medium and low are the 3 different
settings that can be selected.
Choose the remote control cursors to adjust the
brightness value , which ranges from -20 to +20.
Use the remote control cursors to adjust the contrast
value , which ranged from -16 to +16.
PARENTAL CONTROL
NOTE
PASSWORD
0000
DEFAULT
This function limits the playback of DVDs based on the
Motion Picture Association of America’s rating assigned
to each movie. Parent’s can specify the ratings that
require a password to view. The rating listed from low to
high, KID SAF is the lowest and ADULT is the highest.
To turn off this setting, use the cursor on the remote
control to select the last option (Not shown in the
following).
- When changing the parental lock password,
use the number buttons to enter the password
and press ENTER button to confirm.
This option is used to change the password. User must
enter the old password prior to creating a new one. The
default password is
. Remember the new
password is highly recommended.
This option is used to reset all functions in this unit back
to the initial status setting by the factory.
PREFERENCE SETUP
INITIAL SETUP
E22
ENGLISH