Tyan Computer TOLEDO S5520 - Manual (Page 15)

15
USB3/USB4/USB5/USB6: USB Front Panel Connector
1 9
2 10
Pin Signal Pin Signal
1 +5V Standby 2 +5V Standby
3 USB_A- 4 USB_B-
5 USB_A+ 6 USB_B+
7 GND
8 GND
9 Key Pin 10 GND
Use these headers to connect to the USB devices via the
enclosed USB cable.
USB3: J25 USB5: J21
USB4: J39 USB6: J22
COM2 (J29): COM2 Header
10 2
9 1
Use these pin definitions to connect a port to COM2.
*TYAN does not provide cable for this header. It is designed for barebone
use only
.
Pin Signal Pin Signal
1 DCD (Data Carrier Detect) 2 DSR (Data Set Ready)
3 RXD (Receive Data) 4 RTS (Request To Send)
5 TX (Transmit Data) 6 CTS (Clear To Send)
7 DTR (Data Terminal
Ready)
8 RI (Ring Indicator)
9 GND 10 NC
SATA1/2/3/4/5/6: Serial ATA Connector
7
1
Connects to the Serial ATA ready drives via the Serial ATA
cable.
Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7
GND TXP TXN GND RXN RXP GND
SATA1: J34 SATA4: J46
SATA2: J33 SATA5: J45
SATA3: J32 SATA6: J44
FP-AUDIO (J5): Front Panel Audio Connector
1 9
2 10 Pin Signal Pin Signal
1 Microphone In-L 2 GND
3 Microphone In-R 4 Presence-
5 Headphone-R 6 Microphone Sense Return
7 Sense Send 8 Key Pin
9 Headphone-L 10 Headphone Sense Return