Tyan Computer TOLEDO S5520 - Manual (Page 60)

60
3.4.7 Console Redirection
This section allows you to configure the Console Redirection.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Console Redirection
Item Specific Help
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection:
Continue C. R. after POST:
[Disabled]
[19.2K]
[VT 100]
[CTS/RTS]
[Direct]
[Off]
If enabled, it will use a
port on the
motherboard.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit ← → Select Menu Enter Select X Sub-Menu F10 Save and Exit
Com Port Address
Selects Com Port on BMC or motherboard.
Options: Disabled / On-board COM A / On-board COM B
Baud Rate
Enables the specified baud rate.
Options: 19.2K / 300 / 1200 / 2400 / 9600 / 38.4K / 57.6K / 115.2K
Console Type
Enables the specified console type.
Options: VT100 / VT100, 8bit / PC-ANSI 7bit / PC ANSI / VT100+ / VT-UTF8
Flow Control
Enables Flow Control.
Options: None / XON/XOFF / CTS/RTS
Console Connection
It indicates whether the console is connected directly to the system or a modem is
used to connect.
Options: Direct / via Modem
Continue C.R. after POST
Enables Console Redirection after OS has loaded.
Options: Off / On