TAO 90010 User Manual
Page 10
3 Operation
3.1 Frame Buttons Functions
1) Power Button. Press to turn your frame on or off.
2) Previous Button. Press to change selection, or view previous photo.
3) Play/Pause Button. Press to confirm selection, or start/stop slideshow.
4) Next Button. Press to change selection, or view next photo.
5) Menu Button. Press to view the thumbnail screen, or the main menu.
Figure 5
5x7_5.6”_128_style frames
Figure 6
8x10_8”_256_style frames
Figure 7
Photo Clock
Page 10
Tao
www.taoelectronics.com
3.2 Remote Control Functions
1) Exit Button:
Returns to the previous screen.
2) Enter Button:
Press to confirm selection, or start/stop music or
slideshows. This button also allows you to cycle
through slideshow play modes.
3) Up Button:
Moves the selection up.
4) On/Off Button:
Turns the frame on or off.
5) Left Button:
Moves the selection to the left.
6) Right Button:
Moves the selection to the right.
7) Down Button:
Moves the selection down.
8) Thumb Button:
Toggles the thumbnail screen.
9) Delete Button:
Deletes the current selection.
10) Slide Show Button:
Toggles the slideshow on or off.
11) Copy Button:
Saves current photo to internal memory.
12) Vol – Button:
Lowers volume.
13) Vol + Button:
Raises volume.
14) Mp3 Button:
Toggles the MP3 screen.
5x7, 8x10 frames: See above.
Photo Clock: Not applicable.
Figure 7
Remote Control
Page 11
Tao
Copyright ©2007 TAO Electronics, Inc. All Rights Reserved