TAO 90010 User Manual
Page 3
Index
A
AC Power Adapter, 5
Adjust the viewing angle, 7
B
Button Functions, 10
C
CAUTION, 2
Cleaning, 2
compatible memory card, 5
Condensation, 2
Connecting to Power, 7
Contact Us, 17
Customer Service, 17
D
Dimensions, 5
Display, 5
E
Email, 17
ENTER, 11
Environmental Operating Ranges, 5
F
Features, 5
Frame height, 5
Frame stand, 7
Frequently Asked Questions, 15
G
Getting Started, 7
I
IMPORTANT, 3
Included Accessories, 5
Inserting Memory Cards, 8
Installing/Replacing Remote Control Battery, 8
Internal memory, 8
J
JPEG format, 7
L
Listening to MP3 Music, 12
Load photos from the computer. 4
M
Memory, 5
Memory card formats, 5
Menu, 8
Music files, 9
Music Repeat, 13
N
Next, 11
Page 18
Tao
www.taoelectronics.com
Condensation
· If cold water is poured into a glass, water droplets form on the outside of the glass. This is called
condensation. Condensation may occur on internal operating parts of the product. Condensation
occurs:
· When the product is brought from the outdoors into a warm room, or if it is in a cold room which is
heated quickly.
· If the unit is moved suddenly from an air-conditioned room or car to a hot or humid location.
· Should condensation occur, the product may not operate properly if condensation occurs. Wait 1-2
hours (to allow the internal parts to adjust to the surrounding temperature) before using the product.
· Do not apply pressure to the LCD screen as product damage may result.
· A residual image can appear on the screen after a still image is displayed on the screen for a long
period. The image will disappear after a short time.
· The screen becomes warm during normal operation; this is not a malfunction.
· To clean, use a soft, non-abrasive cloth such as the camera lens cloth to clean the LCD screen.
· If you use an LCD Cleaning Kit, do not apply the cleaning liquid directly to the LCD screen. Apply
cleaning liquid to the cleaning cloth first, and then clean the screen.
IMPORTANT INFORMATION REQUIRED BY THE FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference; and (2) this device must accept any interference
received, including interference that may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio elevation reception, which can be determined by
turning the equipment off and on. The user is encouraged to try to correct the interference by one or
more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Contact:
TAO Electronics, Inc.
www.taoelectronics.com
1215 Chrysler Drive, Menlo Park, CA 94205
(tel) 650-326-5000 (ext 101);
(fax) 650-326-5828;
Page 3
Tao
Copyright ©2007 TAO Electronics, Inc. All Rights Reserved