4 installing upnp on windows xp, Adding upnp, Installing upnp on windows xp – Technicolor - Thomson TG784 User Manual
Page 63
E-DOC-CTC-20080421-0010 v1.0
57
6
Getting the Most Out of Your Thomson Gateway
6.2.4
Installing UPnP on Windows XP
Adding UPnP
If you are running Microsoft Windows XP, it is recommended to add the UPnP component to your system.
Proceed as follows:
1
In the Start menu, click (Settings >) Control Panel.
2
The Control Panel window appears.
Click Add or Remove Programs.
3
The Add or Remove Programs window appears.
Click Add/Remove Windows Components.
4
The Windows Components Wizard appears:
In the Components list, select Networking Services and click Details
5
The Networking Services window appears:
Select Universal Plug and Play or UPnP User Interface and click OK.
6
Click Next to start the installation and follow the instructions in the Windows Components Wizard.
7
At the end of the procedure the Wizard informs you that the installation was successful. Click Finish to
quit.