Tripp Lite PowerVerter 200812163 - Manual (Page 3)

3
Feature Identification
Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.
Configuration DIP Switches: optimize Inverter/Charger
operation depending on your application. See Configuration
section for setting instructions.
Operating Mode Switch: controls Inverter/Charger operation.
The "AUTO/REMOTE" setting ensures your equipment receives
constant, uninterrupted AC power. It also enables the Inverter/
Charger to be remotely monitored and controlled with an
optional remote module (Tripp Lite model APSRM4, sold sepa-
rately). The "CHARGE ONLY" setting allows your batteries to
return to full charge faster by turning the inverter off which halts
battery discharging. The "DC OFF" setting de-energizes the unit
and connects AC OUT to AC IN. See Operation section for set-
ting instructions.
"LINE", "INVERT", "LOAD" LEDs: show whether the
Inverter/Charger is operating from AC line power or DC battery
power. It also warns you if the connected equipment load is too
high. See Operation section for instructions on reading the indi-
cator lights.
"BATT VOLTAGE" LEDs: these three lights will turn ON in
several sequences to show approximate battery level. See Operation
section for instructions on reading the indicator lights.
DC Power Terminals: connect to your battery terminals. See
Battery Connection section for instructions.
AC Output Receptacles
AC Input Receptacle (230V Models): attach input cord to con-
nect the Inverter/Charger to any source of utility- or generator-
supplied AC power. The user must provide an appropriate
country-specific input cable for 230V Models. See AC Input/
Output Connection section for instructions.
AC Input Cord (120V Models): plug the Inverter/Charger into
a utility- or generator-supplied AC power outlet.
Resettable Circuit Breakers: protect your Inverter/Charger against
damage due to overload or charger failure. See Operation sec-
tion for resetting instructions.
Remote Control Module Connector: allows remote monitoring
and control with an optional module (Tripp Lite model APSRM4,
sold separately). See remote module owner’s manual for con-
nection instructions.
Main Ground Lug: properly grounds the Inverter/Charger to
vehicle grounding system or to earth ground. See Configuration
section for instructions.
Cooling Fan: quiet, efficient fan prolongs equipment service life.
1
2
3
4
5
6
7B
7A
8
9
10
11
Front View (230V Non-Corded Models) Front View (120V Corded Models)
1 2 4 3 9
10
6
5
11
1 2 4 3
5
6
8
9
11
10
7B
7A
8