Technicolor - Thomson Ferguson FV 400 L - Manual (Page 11)

10
Press W to select the Autosearch line.
If the picture quality is poor:
Make use of the fine-tuning (</>)
with
W W, then C C or B B.
Press the MENU key.
The Installation line is already selected. Press OK.
Select Manual set up, and confirm with OK.
To start channel search, press C or B (you may also
make a direct input with the number keys 0 to 9).
When a channel is found, the picture appears.
Manual channel set-up
3
4
5
6
2
1
With W first select Reception and then choose
CH or CC with C or B (CH stands for the
channels received via your aerial antenna and CC
for the cable network programmes).
If the programme is scrambled (i.e you need a
decoder), press the DEC. key on the remote control
(the symbol is then displayed on the screen).
Press OK to store this number.
Select Pr and give the channel a number with the
0 to 9 keys (example: 0, 1 for PrI).
7
8
Press the VCR key on your remote control.
R8323UR/GB/MR-BEI/910 8/10/99 17:11 Page 10