Technicolor - Thomson Ferguson FV 400 L - Manual (Page 17)

16
Controlling the TV set
To control the TV set:
- press the TV key on the remote control first.
To switch the TV on or to switch into standby:
- press
B B key.
Storing the TV code:
- Press the TV key on your remote control.
- Hold down the MENU key on your remote control and
key in one of the following codes: 000 or 001.
- Release the MENU key.
Your remote control can be used for controlling certain functions of most of our
brand of TV sets. For this, you need to enter one of the following codes: 000 for
the most recent sets and 001 for the others. Depending on the type of TV set you
own, this remote control may not be compatible or certain functions may not be
available.
To switch the sound off:
- press this key.
To choose the TV programme:
- make use of these keys.
To adjust the volume:
- make use of the
a a -/+ key on the remote control.
To select the SCART connector and watch the
pictures from the set connected to this connector:
- make use of the AV key.
These keys have the same functions as the
corresponding ones on the remote control
of the TV set.
Immediate deletion of status information
When playing your recordings, information is displayed on the screen for a number
of seconds.This information can be immediately cleared with the EXIT key.
R8323UR/GB/MR-BEI/910 8/10/99 17:12 Page 16