Technicolor - Thomson Ferguson FV 400 L - Manual (Page 9)

8
6
Press OK key.
8
You’ll have to wait a while until this procedure is completed.
4
As soon as you have found the output channel of the VCR, a
message comes up on the TV screen.
Note:When the picture quality is poor (snowy or torn image), change the
output channel of the VCR with the PR+/PR- keys (when doing so, the
picture will disappear until you return the TV set to the new channel.
You will be informed by a message that your VCR is searching and
storing the channels that can be received in your region. 7
From the TV User Manual, follow the
instructions to find the VCR signal.
3
Store the output signal found on an unused TV programme
number, following your TV instruction book.
Note: Remember this TV programme number as you will have to use it to
watch the playback of your VCR tapes or TV programme.
5
If not, set the clock by means of the number keys (0 to
9). Press key B, type in time and date in the following
order: hour, minutes, day, month, year.
Confirm with OK and press EXIT to leave.
Setting of date and time
Date and time may not be correct
If date and time are correct, press EXIT to
leave the menus.
1
2
3
R8323UR/GB/MR-BEI/910 8/10/99 17:11 Page 8