True Manufacturing Company GDIM-26 - Manual (Page 16)

14 14 ............ www.truemfg.com ............
True Food Service Equipment, Inc.
MAINTENANCE, CARE & CLEANING
REQUIRED TOOLS:
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
Step 1
Disconnect power to unit.
Step 2
Take off lower grill assembly by removing four
(4) corner screws.
Step 3
Remove bolts anchoring compressor assembly
to frame rails and carefully slide out. (tube
connections are flexible)
Step 4
Clean off accumulated dirt from the condenser coil and
the fan with a stiff bristle brush.
Step 5
After brushing the components off vacuum all dirt
residue from the coil, fan, and surrounding areas.
Step 6
Replace cardboard cover. Carefully slide compressor
assembly back into position and replace bolts.
Step 7
Reinstall louver assembly into unit with appropriate
fasteners and clips. Tighten all screws.
Step 8
Connect unit to power and check to see if compressor is
running.
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
NEPCO/CENTRALA
B 122
7- 5
REMO VE CO VER MAKE PO
WE
R
CONNECT IO N
E. McCabe
"
"
"