Toshiba RD-XV47KE - Manual (Page 19)

19 EN
In
trod
uct
ion
Connecti
o
ns
Bas
ic Setup
P
layback
Ed
iti
n
g
V
CR Fu
ncti
on
s
O
th
ers
Fu
nc
ti
on
Set
u
p
Recordi
n
g
23 MODE button:
(HDD/DVD) Press to change the Original and
Playlist on the HDD/DVD title menu.
When User 1 - User 3 in Picture Quality Menu are
selected, press to display User Setup Menu.
(VCR) Press to change the video colour system.
24 CLEAR button:
(HDD/DVD) Press to clear the information once
entered, etc.
Press to delete chapter marks.
(DVD) Press to erase the track number entered in
the programme play screen for Video / Audio CDs.
(VCR) Press to reset the tape counter.
25 AUDIO button:
During playback, press to change the audio
settings.
26 TOP MENU button (HDD/DVD):
Displays the Title List.
27 ENTER button:
Press to confirm or select menu items.
28 RETURN button:
Press to return to the previously displayed Menu
Screen.
29 VARIABLE SKIP button (HDD/DVD):
Skips by the amount of time set in advance.
30 VARIABLE REPLAY button (HDD/DVD):
Replays by the amount of time set in advance.
31 FWD / SLOW f button:
(HDD/DVD) During playback, press to play back
in fast forward. Or when playback is paused,
press to play back in slow forward.
(VCR) During playback, press to play back in fast
forward.
In still mode, press to view the videotape in slow
motion.
During playback in slow motion, press to increase
the speed in slow motion.
Press to fast forward the videotape in stop mode.
32 STOP S button:
Press to stop playback or recording.
33 ADJUST+ button (HDD/DVD):
During playback, press to advance one frame at a
time.
34 VCR button:
Press to activate the VCR. (See page 20.)
35 HDD button:
Press to activate the HDD. (See page 20.)
36 DVD button:
Press to activate the DVD. (See page 20.)
37 REC I button:
Press once to start a basic HDD/DVD/VCR
recording. Press repeatedly to start a One-touch
Timer Recording in HDD/DVD/VCR mode.
38 1.3x/0.8x PLAY button (HDD/DVD):
During playback, press to play back in a slightly
faster/slower speed while keeping the audio
quality.
39 DUBBING button:
Press to start dubbing during HDD/DVD playback.
Press to display the Dubbing Menu during
HDD/DVD stop mode and VCR mode.
‘
Note
• If you turn off this unit, [OPEN / CLOSE O] on the
remote control is not available. Be sure to use
[OPEN / CLOSE
O] or [STOP / EJECT O / S] on the
unit.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly with the operations using the remote control. Some
operations can be carried out using the buttons on the front panel.
E3B90ED_EN.book Page 19 Friday, February 23, 2007 12:38 PM